Gsm incoming groups – 2N BRI Lite/Enterprise v1.7 User Manual
Page 69
69
Time limits
There are two SIM use time limits in a GSM group.
Call tariffs
Use this function to assign up to four independent free minute counters to a group of
GSM modules (SIM cards), e.g.:
= free minutes for calls to own GSM/UMTS network;
Tariff 1
= free minutes for calls to other GSM/UMTS networks;
Tariff 2
= free minutes for calls to fixed network;
Tariff 3
= free minutes for calls within a closed user group (VPN).
Tariff 4
Complete the LCR table (assign prefixes to tariffs) properly to make full use of this
function. If routing to a tariff is not used, the global free minutes function will be used
in the LCR table.
Free minutes - set the free minutes for the tariff offered by the provider.
Transferred minutes - set the maximum count of free minutes to be
transferred to the next period.
Day of restoring free minutes - set a day on which the free minute counters
will be reset automatically. Select every 24 hours, a day in a month, or a day in a
week.
Week of restoring free minutes
- set a week in which the free
in month
minute counters will be reset automatically. Set the week number only if the
restoration takes place
in a month, e.g., or keep
for
every other Friday
Every
the other cases.
GSM Incoming Groups
2N BRI
®
gateway allows you to work with two groups of incoming calls. You can set
different values for each of them.
Caution
The recommended free minute counter value is X–5, where X is the
number of free minutes obtained from the GSM/UMTS provider. Thus, you
can avoid exceeding limits.
The manufacturer is not responsible for additional call costs incurred as a
result of exceeding your GSM/UMTS provider's free minute/SMS limit.