2N Helios IP Vario - Manual (Page 59)

59
2N TELEKOMUNIKACE a.s., www.2n.cz
®
3.4 Intercom Control as Viewed by Internal User
Call answering
Incoming calls from can be received like any other call. You can 2N
®
Helios IP Vario
open the lock and activate or deactivate a user or profile during the call using your
telephone numeric keypad. The call duration is limited to avoid unintentional 2N
®
line blocking. Use the Call time limit parameter to set the maximum Helios IP Vario
call duration (refer to the Intercom Configuration / Services / Phone / Calls subsection
of Configuration Manual). To prolong a call push the # button on your telephone any
time. A short beep 10 s before the call end signals an automatic all termination.
Calling to Helios IP Vario
2N
®
Helios IP Vario allows to answer an incoming call too. To set the required
parameters use the Incoming calls item, refer to the Intercom Configuration / Services
. / Phone / Calls subsection of Configuration Manual
Code Door Opening (Switch Activation)
2N
®
Helios IP Vario is equipped with a door unlocking switch. To activate the switch
enter the valid code (refer to the Intercom Configuration / Hardware / Switches
) on the numeric keypad. subsection of Configuration Manual
Procedure:
Enter the lock 1 or lock 2 activating code using your telephone numeric keypad
and push (confirmation is unnecessary if the Lock code without confirmation
option is selected, refer to the Intercom Configuration / Hardware / Switches /
). Advanced subsection of Configuration Manual
A valid code is announced by acoustic signalling . An invalid code is
announced by acoustic signalling
User Activation and Deactivation
You can activate or deactivate a user and define call routing to the user telephone
numbers using the numeric keypad. For more details refer to the Intercom
. Configuration / Directory / Phone Book subsection of Configuration Manual
Procedure:
Enter the user activation or deactivation code using the numeric keypad and push
for confirmation.
A valid code is announced by acoustic signalling or depending on the
code type. An invalid code is announced by acoustic signalling .