Function, Specifications, Module mounting – 2N Helios IP Vario User Manual

Page 39: Module settings

Text mode
Original mode

2N TELEKOMUNIKACE a.s., www.2n.cz

Function:

The

adds one additional switch to the

Helios IP Vario Additional Switch

basic unit.

Helios IP Vario

Specifications:

Passive switch: NO and NC contacts, up to 30 V / 1 A AC/DC

Module mounting:

Switch off the intercom before module installation.

Module settings:

Refer to the

for details.

2N Helios IP Configuration Manual

Caution

Before installing the module, make sure that the current and voltage
limits of the module will not be exceeded in your application (refer to the
Technical Parameters chapter). In no case use this module for mains
voltage switching!