Rfid card reader, Additional switch, Mechanical properties – 2N Helios IP Force User Manual
Page 58
58
RFID card reader
Optional
Includes besides card reader itself: Wiegand interface, tamper switch,
active output, relay, two inputs
Supported cards on 125 kHz version, 9151011
EM-40XX (125 kHz)
HID Proximity (125 kHz, 26-bit)
Supported cards on 13.56 MHz version, 9151016
Mifare Classic 1k & 4k, DESFire EV1, Mini, Plus S&X, SmartMX, Ultralight,
Ultralight C, SLE44R35, my-d move (SLE66Rxx), PayPass, Legic Advant
Calypso, CEPAS, Moneo, PicoPass, HID iCLASS
Wiegand Interface: Input/Output mode, located on RFID card reader module
Active switch output: 9 up to 13 V DC depending on power supply (PoE: 9 V;
adaptor: power supply voltage minus 1 V), max 700 mA
Passive relay switch: NO and NC contacts, up to 30 V / 1 A AC/DC
Additional switch
Optional: Includes also tamper switch
Active switch output: 9 up to 13 V DC depending on power supply (PoE: 9 V;
adaptor: power supply voltage minus 1 V), max 700 mA
Passive relay switch: NO and NC contacts, up to 30 V / 1 A AC/DC
Mechanical properties
Cover: Robust aluminium cast product, front panel: aluminium cast, fiberglass
FR4 (91511xxxR)
Working temperature: −40 °C to 55 °C
Working relative humidity: 10 % – 95 % (non-condensing)
Storing temperature: −40 °C to 70 °C
Dimensions
217 × 109 83 mm
×
242 136 83 mm incl. frame
Ч
Ч
Weight: netto max. 2 kg / brutto max. 2,5 kg
Covering level: IP65, IP69K (91511xxxW)