Internal rfid card reader 125 khz, Module settings, Connection – 2N Helios IP Force User Manual

Page 29: Function

2N TELEKOMUNIKACE a.s., www.2n.cz

Module settings:

Refer to the

for details.

2N Helios IP Configuration Manual

Connection:

Internal RFID Card Reader 125 kHz

The

(Part No. 9151011) is used for reading

Internal RFID Card Reader 125 kHz

RFID card Ids in the 125 kHz band. This module is intended for mounting into the 2N

Helios IP Force model

. These

9151102CR, 9151102R, 9151101CRP and 9151101RP

models have an window, which is necessary for antenna operation. If the Internal RFID

is installed, it is not possible to install the

Card Reader

Additional Switch

Function:

The

Internal RFID Card Reader adds one logical input, two

Helios IP Force

additional switches and a tamper switch to the

basic unit.

Helios IP Force

The purpose of the tamper switch is to signal any unauthorised opening of the intercom
(to prevent a theft, e.g.). It is recommended to use the tamper switch.