Messaging, Modules grouping – 2N StarGate/BlueTower v5.5 User Manual

Page 90

Messaging

This group helps:

Set the GSM gateway to send/receive SMS via SMTP/POP3 or SMPP
Define the routing rules for incoming and outgoing SMS messages
Check the GSM gateway SMS database filling capacity

Modules Grouping

Global settings

SMS server enabled – enable/disable the SMS server at the GSM gateway
(keep disabled if you select another SMS processing method).
AutoCLIP routing expires [hours] (1-10000, 0=off) – set the maximum
time for keeping of the automatic SMS routing record (response) in the AutoCLIP
table.

Modules to SMS groups assignment

This section helps you assign GSM modules to SMS groups (according to the GSM
provider, e.g.) to facilitate incoming/outgoing SMS routing.

SMS groups to User groups assignment

This section helps you assign SMS groups to User groups for SMS sending/receiving
purposes. The GSM gateway can contain up to four User groups.

Caution

This service is file-licensed. Refer to

for the

Management Licence key

current GSM gateway licence details.