2N StarGate/BlueTower v5.5 - Manual (Page 67)

67
2N TELEKOMUNIKACE a.s., www.2n.cz
®
LOG File
The LOG file window helps read out the gateway LOG file. The bottom part of the
window includes icons for saving the LOG file into a file and refreshing the LOG listing
in the web window.
Refer to the subsection for more details. 5.4 List of LOG Events
CDR File
The CDR file window helps read out the Call Data Records (CDR) of the gateway. The
bottom part of the window includes icons for saving the CDR into a file and refreshing
the CDR listing in the web window.
for more details Refer to Subs. CDR line description
on the CDR format.
Module Status
This window displays the current status of each GSM/UMTS channel. Refer to the 5.1
subsection for status details. List of Status Codes
Note
The PRI 2 connection message will be played only if the B-channel is
opened.
Voice messages with indexes 30 – 37 are used for detection of the mobile
provider's voice message played before call connection. If a match is
found of the voice message with any of the voice messages recorded in
the gateway, the call is terminated automatically or established via the
last GSM outgoing group set in the LCR table (on condition that the ITD –
Ignore tone detection in last group parameter is active) in the Gateway
section. Refer to the Configuration LCR table Gateway Configuration
for GSM basic parameters Voice message detector settings
details.
Caution
The maximum capacity is 962 call records. When this limit is reached, the
oldest record(s) will be deleted automatically!