Omega lite operator services – 2N Omega Lite - Operator Services v1.2 User Manual
Page 19

2N
®
- OMEGA Lite
Operator services
Users Manual - Operator services
18
2.7. Do Not Disturb This Call
Normally, your 2N OMEGA Lite PBX notifies you into your call that you have another
incoming call or that someone has entered your call. To avoid any disturbance of
your current call or disconnect a subscriber that has entered your line:
You are talking with somebody and do not want to be disturbed
With a tone telephone set:
Press ‘FLASH’ or ‘R’ on your telephone set and then dial ‘#8’.
With a pulse telephone set:
Dial ‘78’.
Further, in either case:
The relay for the DO NOT DISTURB light panel turns on (if the light
panel is installed).
Keep talking. You will not be disturbed.
Hang up.
The relay for the DO NOT DISTURB light panel turns off.
The „Do Not Disturb“ status applies to one call only. After you hang up and then pick
up the handset again, the „Disturb“ status is set up automatically.