2N Helios IP User manual, 1510 v1.13 - Manual (Page 65)

Configuration 3.3
65
Telephone Directory
To set the telephone directory, use the Basic settings –> Telephone directory tag. The
telephone directory includes 999 records – positions. Typically, one position
corresponds to one user. You can assign up to three phone numbers to each
position/user.
Figure 3.15 Telephone Directory
To move between the positions either use the arrow buttons, or enter the position
number and push the Move to button in the right-hand upper corner.
The first 54 positions are the same as the quick dialling buttons on 2N ® Helios IP and
buttons on the extending modules (refer to the Button Numbering subsection). For the
other positions use the numeric keypad if available in your 2N
® Helios IP.