2N Helios IP User manual, 1510 v1.13 - Manual (Page 110)

Configuration 3.3
110
Download configuration from device
Used for downloading configuration from 2N ® Helios IP. To save the configuration,
push . Use the checkboxes to select the configuration parts to be downloaded.
Upload configuration to device
Used for uploading configuration to 2N ® Helios IP. Use the Browse button to select
the configuration file and push to upload it to 2N ® Helios IP. Use the
checkboxes to select the configuration parts to be uploaded. For copying the
configuration file from another 2N
® Helios IP device, disable the network and SIP
setting downloading to avoid network collision and use of one and the same SIP
configuration. For automatic configuration update refer to the
Auto Update subsection.
Resetting of all parameters
Resets all 2N ® Helios IP parameters to default values.
Caution
 This selection does not apply to the network settings to avoid network
collision and disabling the option to configure using the administration web
server. To reset the network settings to default values use the procedure
described in the Switching to Default Network Parameters – Static IP
Address and Switching to Default Network Parameters – Dynamic IP
Address subsections.
Display Program
This menu is used for display program uploading. The display program is prepared
using the configuration tool available on the attached CD. For display settings refer to
the Display subsection.
Display Program Uploading
Used for uploading the display program to 2N ® Helios IP. Use the Browse button
to select the configuration file and push to upload it to 2N ® Helios IP. If no
file is selected, the current display program is removed from the memory when
this button is pressed.