2N Helios IP User manual, 1510 v1.13 - Manual (Page 100)

Configuration 3.3
100
user name, date, time, identification and/or called number. These symbols are
replaced with real values before sending. Refer to the table below:
$User$
Called user name
$DateTime$ Current date and time
$DialNumber$ Called number
$HeliosId$ 2N ® Helios IP identifier
Miscellaneous
Here set the additional parameters of 2N ® Helios IP that were not included in the
above-described menus.
Figure 3.39 Miscellaneous Settings
Outgoing Calls
Ring time limit
Set the call set-up and ringing time limits for outgoing calls. If the calls are routed
through the GSM gateways of Part Nos. 505004, 505214 or 505612 to the GSM
network, it is advisable to set a time value longer than 20 s.