2N Analogue UMTS gateway 2N EasyGate UMTS USB - User Manual, v1.00 - Manual (Page 7)

6
2. Installation
2.1. Proper Location
•
EasyGate UMTS Data is designed for vertical mounting on suspension holes (use
the mounting pattern). This position is the best for signal reception because a
vertical antenna is used. EasyGate UMTS Data can be operated in the horizontal
position too where the UMTS signal is good.
•
Install EasyGate UMTS Data with respect to the UMTS signal strength.
•
Place EasyGate UMTS Data out of range of sensitive devices and human bodies for
electromagnetic interference reasons.
•
For the allowed range of operating temperatures refer to the “Technical
Parameters”.
•
It is impossible to operate EasyGate UMTS Data on places exposed to direct solar
radiation or near heat sources.
•
EasyGate UMTS Data is designed for indoor use. It may not be exposed to rain,
flowing water, condensed moisture, fog, etc.
•
EasyGate UMTS Data may not be exposed to aggressive gas, acid vapours, solvents,
etc.
•
EasyGate UMTS Data is not designed for environments with high vibrations such as
means of transport, machine rooms, etc.