2N Analogue UMTS gateway 2N EasyGate UMTS USB - User Manual, v1.00 - Manual (Page 6)

5
1. EasyGate UMTS Data purpose
1.1. Basic Functions
•
The primary purpose of EasyGate UMTS Data is to transmit voice between a UMTS
or GSM network and an attached FXO-interface terminal (PBX, telephone,
answering machine, etc.).
•
You can establish fast internet HSDPA connection or GPRS connection.
•
You can send an SMS to a pre-programmed number using the SMS sending input.
•
EasyGate UMTS Data can’t establish data/fax connections!
1.2. Advantages of EasyGate UMTS Data Use
•
Call cost cutting – by forwarding UMTS/GSM calls to EasyGate UMTS Data you save
a lot on PSTN – UMTS/GSM calls.
•
Easy installation – EasyGate UMTS Data is designed for immediate use without
programming.
•
You get all you need in the delivery – your EasyGate UMTS Data delivery contains
all you need to operate the system (the power supply adapter, telephone cable, PC
serial cable and CD-ROM with software).
•
Solution for sites without telephone lines – such as mountain chalets, exhibitions,
conferences, etc.
•
CLIP - EasyGate UMTS Data is equipped with the FSK-based CLIP feature, so if a
terminal capable of receiving the CLIP is used you know the caller‘s number.
•
Fast internet connection – EasyGate uses HSDPA for internet connection (max
speed 7.2 Mbit/s). HSDPA connection and voice calls can run simultaneously on
gateway
•
SMS sending input – simply send an SMS to a pre-programmed number by closing
the contact. Recommended for easy supervision, simple securing, etc.
•
Radiation hazard minimization – you are not exposed to a direct effect of the
antenna RF electromagnetic field while telephoning as opposed to mobile telephones.
•
Full UMTS/GSM coverage – UMTS 2100MHz and GSM 850/900/1800/1900MHz.