2N Analogue UMTS gateway 2N EasyGate UMTS USB - User Manual, v1.00 - Manual (Page 26)

25
Busy tone - cadence Function No.: -
Busy tone cadence setting.
Setting options:
330/330 ms -cadence 330 ms tone, 330 ms pause
200/200 ms -cadence 200 ms tone, 200 ms pause
250/250 ms -cadence 250 ms tone, 250 ms pause
375/375 ms -cadence 375 ms tone, 375 ms pause
500/500 ms -cadence 500 ms tone, 500 ms pause
Default setting: 330/330 ms
Tone after disconnection
Function No.: -
If the remote subscriber hangs up first, the EasyGate subscriber can hear the
tone selected here.
Setting options:
Busy -EasyGate transmits the busy tone upon call end.
Permanent -EasyGate transmits the permanent tone upon call end.
Default setting: Busy tone
8.3.1.4 Volumes
Transmission volume Function No.: 10
Volume setting for GSM transmission with a 4 dB step.
Setting options: 1-5
Setting step: 1
Default setting: 3 = medium volume level
Reception volume
Function No.: 11
Volume setting for GSM reception with a 4 dB step.
Setting options: 1-5
Setting step: 1
Default setting: 3 = medium volume level
8.3.1.5 Ringing signal settings
Ringing signal – frequency [Hz] Function No.: -
Ringing signal frequency setting.
Setting options:
25 / 50 Hz
Default setting: 50 Hz
Ringing signal - cadence
Function No.: -
Ringing signal cadency setting.
Setting options:
1000/4000 ms - 1 s ring, 4 s pause
400/200/400/2000 ms - 400ms ring, 200ms pause, 400ms ring, 2s pause
1500/3500 ms - 1,5 s ring, 3,5 s pause
2000/4000 ms - 2 s ring, 4 s pause
Default setting: 1000/4000 ms