2N Analogue UMTS gateway 2N EasyGate UMTS USB - User Manual, v1.00 - Manual (Page 15)

14
5.6. Call forwarding
For forwarding activation you must specify the calls will be
forwarded to. You may specify , if you want to forward specified call type
only. You may specify in seconds for forwarding if no answer too.
Description of field codes:
Voice:
Data:
Fax:
5.6.1. Call forwarding unconditional
If activated, incoming calls will be always forwarded to the configured telephone
number.
Activation for all call types:
Activation for selected call type:
Deactivation:
Status check:
5.6.2. Call forwarding if busy
If this option is activated, incoming calls will be forwarded to the configured telephone
number if there is call in progress on EasyGate.
Activation for all call types:
Activation for selected call type:
Deactivation:
Status check:
5.6.3. Call forwarding if no answer
If activated, incoming calls will be forwarded to the configured telephone number if
incoming call isn’t answered during specified timeout. Default timeout is 20 seconds.
Activation for all call types:
Activation for selected call type: