JLG T350 Service Manual - Manual (Page 165)

SECTION 6 - JLG CONTROL SYSTEM
3121198 – JLG Lift – 6-5
6.6 MACHINE SETUP
When a machine digit item is selected, press the UP or
DOWN arrow keys to adjust its value, for example:
GROUND ALARM:
2 = MOTION
The effect of the machine digit value is displayed along
with its value. The above display would be selected if the
machine was equipped with a ground alarm and you
wanted it to sound when lifting down. There are certain
settings allowed to install optional features or select the
machine model.
When selection the machine model to match the size of
the machine, the personality settings will all default to the
factory recommended setting.
NOTE: Refer to Table 6-2, Machine Model Adjustments and
Speeds - ANSI & CSA and Table 6-3, Machine
Model Adjustments and Speeds - CE Only for the
recommended factory settings.
NOTE: Password 33271 will give you access to level 1,
which will permit you to change all machine person-
ality settings.