Eppendorf 3100 Digital Water Bath Shake - Manual (Page 18)

12
Inches Centimeters
Width 19½ 43.2
Depth 27½ 69.9
Height 17 36.8
The effective surface area required for operation is:
Inches Centimeters
Width 21½ 48.3
Depth 30 76.2
3.3.2 Hose Connections
A ½ inch diameter reinforced hose is provided for water addition and drainage.
Cut the hose into two lengths, to suit the distances from the water source to the
machine.
Install the hosing as follows, using Figure 6 on following page for reference:
1. Connect one length of ½ inch hose to the WATER IN FITTING.
2. Connect the other length of ½ inch hose to the DRAIN FITTING.
3. Clamp the hoses with the clamps provided.
4. Connect the “WATER IN” hose to a water supply with a maximum water
pressure of 100 psi. The drain hose must go to an OPEN drain.
5. Attach the smaller diameter (3/8 inch) hose to the overflow tube, and run it
to an OPEN drain.