Eppendorf 3100 Digital Water Bath Shake - Manual (Page 13)

7
Innova 3100  M1231-0050 Operating manual
• SET
Indicates that the shaker is in the SET mode, that setpoints are being
displayed and that they can be altered.
• TIME
Indicates that the timer is in operation. Innova shakers can be programmed
to run for a preset time from 0.1 hour to 99.9 hours. The timer can be
disengaged to reset without stopping an ongoing run.
• MUTE
Indicates the status of the audible alarm. When the MUTE indicator is
illuminated the audible alarm device is disabled.
2.3.4 Function Indicator Lights
There are four function indicator lights, located to the right of the LED display.
They indicate the current parameter being displayed:
• RPM
Revolutions per minute
• HRS
Time remaining
• °C
Current Temperature
• *
Low Water Level
2.4 Platform Assemblies
The Innova 3100 can be used with a wide variety of NBS 12 inch x 16.5 inch
platforms which will accept a variety of clamps for flasks and test tubes. Additionally,
a subplatform is available to adapt half platforms for flasks and test tubes used on the
NBS Model G86 Aqua Therm Water Bath Shaker.
2.5 Cooling Coil Option
The Innova 3100 can be ordered with a cooling coil factory-installed. The cooling coil
provides the ability to operate at temperatures below ambient.
2.6 Accessories & Options
The following accessories are available for use with your Innova 3100:
• Gable Cover (plexiglass or stainless steel).
• Portable cart or space saving dolly.