Advance Adapters 713091 User Manual

Page 3

ADVANCE ADAPTERS INC.

P/N: 713091

P.O. Box 247, 4320 Aerotech Center Way

New Item: (08/02)

Paso Robles, CA 93447

PAGE 3 OF 4

Telephone: (800) 350-2223

Fax: (805) 238-4201

Page Rev. Date:

8-15-11

SPECIAL NOTE:

The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void

any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that
you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service
manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships
and parts stores.

CHEVY V8 TO JEEP TJ WELD-IN MOUNT

REPLACING THE STOCK 6 CYL.

Stock style manifolds work well with the engine set in any position.
Some firewall clearance will be necessary when the engine is set back
to the rearward.

Due to the various drivetrain applications, driveline modifications may
be required. Keep in mind header or manifold selection when trying
to alleviate driveshaft modifications.

A thin flex-fan (with shroud) or electric fan will be needed for cooling.

Camaro manifold in the rear mount position.

LT1 manifold in the rear mount position

Retaining the stock transmission will normally require
driveline modifications due to firewall clearance issues
on the back of the block.