Advance Adapters 713090 - Manual (Page 4)

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components
will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly
recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components.
We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals
are normally available at automotive dealerships and parts stores.
The LT1 engine can be used with these mounts as long as you replace the A/C pump with the Chevy P/N 10115875.
This is a replacement pulley for the LT1 that removes the A/C pump. The replacement pulley is slightly smaller in diameter
and will require a new belt.
ADVANCE ADAPTERS INC. P/N: 713090
P.O. Box 247, 4320 Aerotech Center Way New Item: (08/02)
Paso Robles, CA 93447 PAGE 4 OF 4
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 08-06-10
CHEVY V8 TO JEEP TJ BOLT-IN MOUNTS
REPLACING THE STOCK 4 CYL.