Advance Adapters 713090 - Manual (Page 3)

ADVANCE ADAPTERS INC. P/N: 713090
P.O. Box 247, 4320 Aerotech Center Way New Item: (08/02)
Paso Robles, CA 93447 PAGE 3 OF 4
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 11-16-04
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void
any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that
you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service
manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships
and parts stores.
CHEVY V8 TO JEEP TJ BOLT-IN MOUNTS
REPLACING THE STOCK 4 CYL.
Stock style manifolds work best with the engine set in the furthest back set of
holes. Some firewall clearance will be necessary. If the mounts are in the forward
location, some clearance/cutting is required on the stock frame mount itself.
Due to the various drivetrain applications, driveline modifications may be
required. Keep in mind header or manifold selection when trying to alleviate
driveshaft modifications.
A thin flex-fan (with shroud) or electric fan will be needed for cooling.
Camaro manifold in the rear mount position.
Camaro manifold in the rear mount position.
Truck manifold in the front mount position.
LT1 manifold in the rear mount position
LT1 manifold in the rear mount position