Advance Adapters 50-3032A User Manual
Kit consists of
KIT CONSISTS OF:
No.
Qty
Part No.
Description
ADVANCE ADAPTERS INC.
P/N: 50-3032A
P.O. Box 247, 4320 Aerotech Center Way
New Item: (01-02)
Paso Robles, CA 93447
PAGE 1 OF 6
Telephone: (800) 350-2223
Fax: (805) 238-4201
Page Rev. Date:
02-28-14
SPECIAL NOTE:
The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will
void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend
that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a
service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive
dealerships and parts stores.
DANA 300 T/C
32 SPLINE OUTPUT WITHOUT YOKE
SPECIAL NOTE:
This kit will not work with
the short version tailhousing
of the Dana 300. The short
style tailhousing measures
approximately 3.5", and re-
quires kit # 50-3034
1.
1
300491
REAR YOKE END PLAY SHIM (3 sizes) (Installed by AA)
2.
1
300513
BEARING, REAR OUTPUT FRONT (Installed by AA)
3.
1
300515
CAGED NEEDLE BEARING (Installed by AA)
4.
1
300625
SPEEDO RING GEAR
5.
1
300627
CIRCLIP, SPEEDO RING GEAR
6.
1
300630
O-RING FOR SPEEDOMETER
7.
1
300922
BREATHER, BRASS ELBOW
8.
1
51-3000
CASTING (Installed by AA)
9.
1
52-3000
SHAFT (Installed by AA)
10.
1
716296
THRUST WASHER FOR DANA 300 (Installed by AA)
11.
1
716303
TAPPERED BEARING (Installed by AA)
12.
5
723730
S.H.C.S. 3/8"-16 x 1-1/4"
13.
1
301403
BOLT- 5/16"-18 x 3/4" H.F.C.S. NON SERRATED W/ND
NOTE: This kit is 1/2" longer than stock.
FOR DIFFERENT YOKE OPTIONS ORDER 50-3032A