Advance Adapters 50-9001 - Manual (Page 4)

ADVANCE ADAPTERS INC. P/N: 50-9001
P.O. Box 247, 4320 Aerotech Center Way New Item: (9/09)
Paso Robles, CA 93447 PAGE
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date:
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will
void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend
that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a
service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive
dealerships and parts stores.
7. Install idler gear and pan to transfer case as per manual.
8. Test fit PTO cover. Rotate gear assembly to insure there is no
interference with the new nut and PTO cover.The new nut is a
close fit into the bore of the PTO cover pocket bearing. Addi-
tional gaskets may need to be stacked due to variances in
transfer case casting thicknesses.
9. Finish assembling the transfer case as per factory instruction
manual.
10. With the replacement engine and transmission combination
positioned within the chassis rails you now have the opportunity
to “clock” the transfer case. The six studs P/N 302069 and
flange nut P/N 302071 are provided for final assembly in the
desired “clocking” rotation.
Note: All threads into the Land Rover transfer case are standard UNC. Park brake linkage and mount system will
need modifiing.
LAND ROVER SERIES T-CASE to NP
CIRCULAR 6 ADAPTER with DODGE 29 SPLINE
03-25-10
4 OF 6