Advance Adapters 716131-E User Manual
Page 3
ADVANCE ADAPTERS INC.
P/N: 716131
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447
PAGE 3 OF 4
Telephone: (800) 350-2223
Fax: (805) 238-4201
Page Rev. Date:
05-14-09
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void any possible warranty
or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that you contact our sales department for more
information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque
values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships and parts stores.
JEEP 727 & 999 TORQUEFLITE TO CHEVY
ENGINES (REPLACING AMC 6 CYL.)
aluminum ring is also dual drilled To match the various stock flexplates. If your flexplate only has one pattern, match it
to the new aluminum ring and use 3 of the 6 bolts provided. If you have a dual drilled flexplate you can choose one set
of three holes and bolt the two together, or you can use all 6 bolts if you perfer.
7. You must then bolt the torque converter assembly to the flexplate. You will have to install one bolt at a time into
the torque converter ring and then rotate the flexplate assembly. You might find it easier to remove the spark plugs
on the engine so you can turn the flexplate assembly by hand. Once all fasteners are lightly snug to the torque
converter, torque the flexplate to aluminum ring bolts to 30 ft.lbs.
WARNING:
This adapter is precision engineered and machined. At no time should the fastening hardware be used to "suck it up". Any
additional assistance should be directed to the technical sales department of Advance Adapters, Inc. (800-350-2223).
NOTE:
This kit must be used with a
168 tooth starter. This starter
has the staggered bolt pattern.