beautypg.com

Advance Adapters 712569 User Manual

Page 5

background image

ADVANCE ADAPTERS INC.

P/N: 712569

P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447

PAGE 5 OF 6

Telephone: (800) 350-2223

Fax: (805) 238-4201

Page Rev. Date:

08-16-94

SPECIAL NOTE:

The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void

any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that
you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service
manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships
and parts stores.

(2) HOLES TO BE ELONGATED
AS SHOWN

LOWER SECTION OF TWO PIECE DUST COVER

TYPE 2

TYPE 1

THERE ARE VARIOUS TYPES OF
DUST COVERS FOR THE JEEP MO-
TORS. WHEN YOU HAVE FOUND OR
ALREADY HAVE THE PROPER DUST
COVER, YOU WILL NEED TO MODIFY
IT ACCORDINGLY. CUT OUT THIS
A R E A F O R S L A V E C Y L I N D E R
CLEARANCE BEFORE ASSEMBLING
THE BELLHOUSING TO THE MOTOR.
FAILURE TO DO SO, WILL RESULT
IN DISASSEMBLY OF BELLHOUSING
TO MOTOR.

*NOTE:
The lower dust cover must be modified accordingly
before installation of slave cylinder. Slave cylinder
should be installed to top of dust cover.

BELLHOUSING FOR JEEP 4.0 HIGH OUTPUT

6 CYLINDER ENG. TO T150, T176, T5, T18 & T4