Advance Adapters 712569 - Manual (Page 3)

ADVANCE ADAPTERS INC. P/N: 712569
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447
PAGE 3 OF 6
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 02-10-09
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components
will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly
recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components.
We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are
normally available at automotive dealerships and parts stores.
CAUTION:
Transmission bearing retainer
length is critical! If too short,
release bearing could possibly
slip off end when bearing is fully
depressed. Clutch linkage ad-
justment will prevent excessive
release bearing travel and pre-
vent over depression.
BELLHOUSING FOR JEEP 4.0 HIGH OUTPUT
6 CYLINDER ENG. TO T150, T176, T5, T18 & T4
or GM wedge
P/N 716139