Advance Adapters 712568 - Manual (Page 2)

ADVANCE ADAPTERS INC. P/N: 712568
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447
PAGE 2 OF 8
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 05-18-99
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components
will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly
recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components.
We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are
normally available at automotive dealerships and parts stores.
Stock GM retainer
Line up holes of the modified retainer with the GM
retainer holes.
(side view)
716067A retainer indexed
over the stock GM
retainer.
Make sure the
modified retainer
lines up with the
two drilled &
tapped holes on
the GM retainer.
Bolt the retainers
together using the
two (2) 6mm bolts
& Loctite 242.
BELLHSG. FOR JEEP 4.0 & V8 304 ENG.
TO 1996 & NEWER GM NV4500