Snorkel TB85J CE - Manual (Page 30)

Chapter 6 – Controls
26 TB80/TB85J – 0112622EE
Machine functions will not operate while the switch is in
the generator position.
Driving and Platform Work Lights
The control for the optional driving lights is on the back of
each light. Place the switch in the on position to operate
the driving lights.
The control for the optional platform work lights is on the
back of each light.
Figure 6.10 – Platform Work Light
Platform Foot Switch
The upper controls are interlocked through the platform
foot switch (refer to Figure 6.9). Step down on and hold
the platform foot switch to activate the drive and boom
functions from the upper controls.
Figure 6.9 – Platform
Machine/Generator Switch
The switch for the optional AC generator is located on
the front of the upper control panel.
With the engine running, place the switch in the genera-
tor position to provide electrical power to the electrical
outlet at the platform. Place the switch in the machine
position to turn off the generator and resume machine
operation.
Platform Foot
Switch