Snorkel MHP34J(Bi-Energy Option) - Manual (Page 66)

Insulation rating, 3-1
L
Left side view of machine, 3-6
Light Flashing, 7-5
Lower control box, 7-6
M
Maintenance personnel
see Introduction - page iii
Maximum height to basket floor, 3-1
Maximum outreach, 3-1
Maximum outreach height, 3-1
Maximum rated axle capacity, 3-1
Maximum towing speed, 3-1
Maximum width of base
Outriggers extended, 3-1
Outriggers retracted, 3-1
Minimum Safe Approach Distance
see Electrical Hazard - page ii
N
Nomenclature And Serial Numbers, 3-5
O
Operating Procedures, 8-1
Control Stations, 8-1
Emergency Stopping, 8-1
Moving The Platform, 8-4
Starting From Ground Control Box, 8-2
Starting From Platform Control Box, 8-3
Operation, 8-1
Operators
Qualified, 7-1, 8-2
Other Safety Devices, 2-1
Overall Dimensions MHP12/34J, 3-3
Overall height, 3-1
P
Placards and decals, 7-7
Inspection drawing, 7-8
Standard placards and decals, 7-7
Platform
Foot switch, 8-5
Lanyard anchor points, 7-5
Platform Control Box Controls, 6-5
Platform size, 3-1
Pre-start Inspection, 1-1
Q
Qualified operators
see Introduction - page iii
R
RCD/ELCB Outlet (option), 5-1
Responsibilities of owners and users
see Introduction - page iv
Right side view of machine, 3-5
S
Safe Operation, 1-1
Safe working load, 3-1
Safety Decals and Placards, 1-3
Location illustration, 1-4
Safety Devices
Bubble level, 2-2
Emergency Stop Switches, 2-1
Flashing light, 2-3
Foot switch, 2-2
Gravity gate, 2-2
Guardrails, 2-2
Lanyard anchor points, 2-1
RCD/ELCB AC outlet, 2-3
Safety Device Information, 2-1
Safety precautions
Fuel Handling Precautions, 1-3
Mounting and Dismounting Precautions, 1-2
Operating Precautions, 1-2
Operator, 1-2
Operator Maintenance Precautions, 1-3
Personnel Precautions, 1-2
Starting and Stopping Precautions, 1-2
Sandblast protection kit, 8-1
Securing for Day, 8-5
Serial number location, chassis, 3-6
Signs, Caution, Danger, Notes
see Introduction - page iii
Standard colour, 3-1
Stowing
Trailering
Forklift points, 10-2
Stowing the MHP12/34J, 10-1
Boom lock pins, 10-1
Boom restraints and keepers, 10-1
Structural damage and welds, 7-4
Boom welds, 7-5
T
Tipover hazard, 1-1
index 2 MHP12/34J – 11447A
Index