Snorkel AB60J - Manual (Page 22)

Chapter 4 – Safety Devices
18 AB60J – 0181972
Platform Work Lights
The optional platform work lights may be used to help
improve visibility while working aloft in dimly lit areas.
The platform work lights are located on the top rail of
the platform, one on each side of the upper control
panel.
Do not use the platform work lights to drive on public
roadways.
Bumpguard System
The optional bumpguard system is a spring mounted
padded railing below the platform. There are two infra-
red lights mounted along the bottom of the platform next
to two infrared sensitive switches. The lights shine on
reflectors on the bumpguard system and are reflected
back to the switches.
If the bumpguard comes into contact with a stationary
object, the bumpguard moves and one or both of the
light beams is broken, immediately stopping all platform
movement.


Figure 4.8 – Flashing Lights
The lights flash at about one flash per second when the
engine is running.
Driving Lights
The optional headlights and blinking tail lights may be
used to help improve visibility while driving the aerial
platform and help others see it too.
The headlights are located on the top of the front
cowling.
The tail lights are mounted on the sides of the rear
cowling.
Do not use the driving lights to drive on public road-
ways.



Flashing Light