Snorkel SPM20-sn00000 User Manual

Page 37

Text mode
Original mode

3.10 QUICK-CHANGE PLATFORM MOUNTING

SPM20 Model Lifts are equipped with quick-change platform mount, which allow quick
removal and installation of currently available quick-change platform.

NOTE: SPM20 Models require the installation of the Quick-Change mount kit to use Quick-

Chang Platforms.

1. Upper Platform Mount

2. Upper Mount Fasteners

3. Lower Platform Mount

4. Lower Mount Fasteners

Platform Removal

1. Remove the platform control console from the platform and lay aside.

2. Remove both upper and lower mount fasteners securing the platform support rails to the

mast mounting channels.

3. Swing and lift the platform out of the mounts and lay aside.

Platform Installation

1. Set platform in upper and lower mounts.

2. Install mount fasteners in upper and lower mounts.

3. Attach platform control console to platform rail.

WARNING

ENSURE ALL FASTENERS ARE INSTALLED AND SECURE PRIOR TO OPERATION.