Snorkel SPM20-sn00000 - Manual (Page 26)

22
NOTE: Ensure Pot-Hole-Protection device is fully engaged (both bars down) when the
platform is elevated.
b. Ensure that all machine functions are disabled when the Emergency Stop Button is
activated.
c. Check Manual Control valve is operating properly.
2. From the platform control console:
a. Ensure that the control console is properly mounted and secure.
b. Raise and lower platform 2 ft. to 3 ft. (.61m to .92m) several times. Check for smooth
elevation and lowering of platform.
c. Operate all functions and check all limit and cutout switches.
d. Ensure that all machine functions are disabled when the Emergency Stop Button is
activated.
3. With platform in the transport (stowed) position:
a. Drive the machine on a grade, not to exceed the rated grade ability, and stop to ensure
the brakes hold.
b. Check the 1.0 degree tilt sensor alarm to ensure proper operation.