Snorkel SPM20-sn00000 User Manual

Page 34

Text mode
Original mode

. Move the joystick the desired direction of travel. TO STOP the machine return the joystick

back to center.

Elevating/Lowering the Platform

WARNING

IF THE TILT ALARM HAS BEEN ACTIVATED, THE PLATFORM WILL NOT ELEVATE.
ALSO IF THE TILT ALARM HAS BEEN ACTIVATED WHEN THE PLATFORM IS ELEVATED,
THE DRIVE FUNCTION WILL BE DISABLED UNTIL THE PLATFORM IS COMPLETELY

LOWERED.

1. Drive the machine to the area where overhead work is to be performed and position the

machine into its approximate work position.

2. PRESS and RELEASE the Platform Function Button.

3. While the Platform Function is active. PRESS and HOLD the Enable Button on side the

Joystick.

4. Push the Joystick FORWARD from center TO ELEVATE the Platform.

TO STOP platform movement return the joystick back to center. Pull

the Joystick BACK from center TO LOWER the Platform.

5. If necessary, reposition (drive) lift using platform controller joystick to bring work object within
reach.