Lukas SP 512 - Manual (Page 42)

42
12.1 Peeling
12.2 Recommended hydraulic fl uid
12.3 Operating and storage temperature ranges
CAUTION!
Before using hydraulic fl uids, which do not correspond to the above-mentioned
specifi cations and/or are not purchased from LUKAS, you have to contact
LUKAS itself!
Type SP 310 SP 510 SP 512
max. sheet steel
thickness “t”
[mm] 4 5 5
[in.] 0.16 0.20 0.20
max. possible
peeling length
[mm] 520 650 500
[in..] 20.47 25.59 19.69
Hydraulic fl uid for LUKAS hydraulic equipment:
Mineral oil DIN ISO 6743-4 and others
Oil temperature range Oil code Viscosity rating Remarks
A
-20 .... +55°C
HM 10 VG 10
-4.0 .... +131°F
recommended viscosity range: 10...200 mm²/s (10…200 cSt.)
Supplied with HM 10 DIN ISO 6743-4.
Operating temperature [°C] / [°F] -20 … +55 -4 … +131
Ambient temperature
(device in operation)
[°C] / [°F] -25 … +45 -13 … +113
Storage temperature
(device not in operation)
[°C] / [°F] -30 … +60 -22 … +140
The total oscillation value / vibration value to which the upper limbs are exposed, is usually
below 2.5 m/s².
Higher values may be measured for short periods as a result of interaction with the materials
to be processed.
12.4 Oscillation / vibration