Lukas SP 512 - Manual (Page 27)

27
Procedure:
1. Close the rescue unit until a gap of only a few mm remains between the tips. Disconnect
the device from the hydraulic power supply unit and clean thoroughly.
3. Pull the handle “D” backwards over the hose
connections.
A
B
C
D
B
B
10.3.4 Spreader arm, spreader tips, protection cover and handle replacement
(SP 510 and SP 512)
E F
4. In the same way, pull the protective cover
“E” backwards over the hose connections.
Components to be
replaced
Required work steps
Handle 1. - 3. and 7.
Protective cover 1. - 4. and 7.
Plug-on tips 1. - 5. and 7.
Lever links 1. - 5. and 7.
Spreader arms 1. - 6. and 7.
2. Unscrew nuts “A”, remove washers “B” and
remove fi xing bolts “C”.