Apple Using WaveBurner Logic Pro 7.1 - Manual (Page 13)

13
To show the Index Point Info window:
m Double-click on the desired index marker.
The General pane of the Index Point Info window displays the following information:
• Index Point Name
• Track Number
• Index Point Number
• Position (of the Index point) Relative To Track
• Position (of the Index point) Relative To Disc
The Comments pane allows you to enter notes for the selected Index Point.
The Previous and Next buttons allow you to step between the preceding and ensuing
Index Points.
The Cancel and OK buttons cancel or execute any changes made in the Index Point Info
window.
Level Meter
The Level Meter window displays the volume level of the left and right channels of
your project—in real time, as the project plays.
To show the Level Meter window:
m Choose Window > Open Level Meter (or press Command-L).
For more information about using the Level Meter, see “ Level Meter ” on page 39.
Customizing the WaveBurner Window
You can customize the WaveBurner main window by adding buttons for the
commands you use most often. You can choose the buttons you want to add from the
Toolbar.
To customize the WaveBurner window:
1 Control-click (or right-click if you have a two-button mouse) the top part of the
WaveBurner window, then choose Customize Toolbar from the shortcut menu.
2 Drag the buttons you want to add from the Customize Toolbar pane to any empty area
along the top of the window. If you drag a button to a location between two existing
buttons, they will move to make space for the new button.
3 To remove a Toolbar item, control-click (or right-click if you have a two-button mouse)
on the desired icon, then choose Remove Item from the menu.
4 Click Done when finished.