Apple AppleShare 3.0 - Manual (Page 4)

Be sure to check with your network system administrator before installing any
new software -- particularly printer drivers.
- at least 1 megabyte of RAM (random-access memory)
- at least one connection to an AppleTalk network -- LocalTalk, EtherTalk,
and TokenTalk networks all support AppleTalk. (Hint: if you currently print
to a LaserWriter printer, you are connected to an AppleTalk network.)
- at least one floppy disk drive or a hard disk
- the AppleShare Workstation disk
Installing AppleShare file service software
1. Insert the AppleShare Workstation disk into a floppy disk drive.
2. Open the Installer.
Double-click the disk icon, and then double-click the Installer icon in the
window. You then see the Installer screen.
3. Click Install.
When the installation is complete, you'll see a message that installation was
successful.
4. Click Restart.
Reducing the size of your system disk If you start your computer from a
floppy disk and you have added several desk accessories or system files, you
may find that you have less and less room for your own programs and
documents. To compensate for this, you can start with a minimal system disk
that contains the System Folder files that originally came with your
Macintosh, such as the Finder, Control Panels, and so on, and AppleShare.
Then you can use products that allow you to store desk accessories, fonts,
and other files on another floppy disk. Consult your network administrator or
Apple sales representative for more information.
____________________________________________________________________________
CHAPTER 2
____________________________________________________________________________
USING APPLESHARE FILE SERVICE
This chapter describes how you connect to an AppleShare file server. It
includes:
- a checklist of things to do before you use file service
- step-by-step instructions for connecting to the file server
- instructions for controlling access to your folders and documents on the
file server
A checklist for getting started with file service
Before you can use an AppleShare file server, you need to do the following: