Apple Setting Up Your Power Macintosh G4 (PCI & AGP) - Manual (Page 49)

Working Inside the Computer 49
Installing a PCI Expansion Card
1 Remove the screw that holds the port access cover in place, pull out the access cover, and set
it aside.
2 If you want to replace or remove a card that’s installed in the computer, remove the screw
that holds the card in place and pull the card from the slot.
Important Before installing a PCI expansion card, read “About PCI Expansion Cards” on
page 30 and follow the steps in “Opening the Computer” on page 32.
Port access cover
Remove the screw that
holds the port access
cover in place.