Apple Setting Up Your Power Macintosh G4 (PCI & AGP) User Manual

Page 28

Chapter 2

Note: The maximum number of drives that can function in the lower drive bays is two ATA
drives or three SCSI drives.

For technical information about the power requirements for devices the computer can
accommodate, see the electronic documentation that came with the computer.

The following table shows the type, number, and height of drives that ﬁt on the carrier in
each drive bay. (A drive already occupies at least one of these positions.)

CD-ROM/DVD-ROM/DVD-RAM drive bay

Zip drive bay (Zip drive is optional)

Drive position 3: Accommodates

two 3.5" ATA hard disk drives

(maximum 1" high), or a single

SCSI drive (maximum 1.6" high).

Drive position 2: Accommodates a

3.5" SCSI hard disk drive

(maximum 1.6" high).

Drive position 1:
Accommodates a 3.5" SCSI
hard disk drive (maximum 1.6" high).

Position 1 (front)

Position 2 (middle)

Position 3 (rear)

SCSI: One 1.0-inch (25.4
mm) or 1.6-inch (40.6
mm) drive

SCSI: One 1.0-inch (25.4 mm) drive; or
one 1.6-inch (40.6 mm) drive

ATA: One or two 1.0-inch (25.4 mm)
drives