Apple Setting Up Your Power Macintosh G4 (PCI & AGP) - Manual (Page 48)

48 Chapter 2
10 If you have installed two or more SCSI drives, tape the SCSI data cable to the top of the
drives in positions 1 and 2.
11 If you are finished installing items in your computer, skip ahead to “Closing the Computer”
on page 53. If you want to install other items, go to the relevant section.
If you’re installing a SCSI drive in drive position 1 or 2, put the ribbon cable on top
of the drives. You can tape the ribbon cable to the tops of the drives with double-stick
foam tape to make the cable lie flat.
PCI SCSI card
The ribbon cable may attach to a different position on
the PCI SCSI card, depending on which card you have.
To install Go to the section
PCI expansion card “Installing a PCI Expansion Card” on page 49
New battery “Replacing the Battery” on page 52