Installing an airport extreme card – Apple eMac (USB 2.0; Early 2004) User Manual
Page 41
Chapter 4
Enhancing Your Computer
41
The total includes the amount of memory that originally came with the computer plus
the new memory you added. For a more detailed breakdown of the amount of
memory installed in your computer, open Apple System Profiler by clicking More Info.
If your computer doesn’t recognize the memory or it doesn’t start up correctly, shut
down your eMac and check the instructions again to make sure that the memory you
installed is compatible with this eMac and that it is installed correctly. If you still have
problems, remove the memory and consult the support information that came with
the memory or contact the vendor who provided the memory.
Installing an AirPort Extreme Card
If your computer did not come with an AirPort Extreme Card, you can purchase one
from your Apple-authorized dealer or from the Apple Store at www.apple.com/store
and install it yourself or have it installed by an Apple-authorized service provider.
Note: Your eMac is not compatible with older AirPort Cards. Use only an AirPort
Extreme Card.
To install an AirPort Extreme Card in your eMac:
1
Press the Media Eject key (
) on the keyboard to open the access door. Then hold the
door open and press the eject key again to retract the drive tray.
2
While continuing to hold the door open, turn your computer off by choosing
Apple (K) > Shut Down.
LL2522.book Page 41 Wednesday, February 18, 2004 11:53 AM