Apple eMac (USB 2.0; Early 2004) - Manual (Page 39)

Chapter 4 Enhancing Your Computer 39
4 Touch metal inside the computer to protect the computer from damage caused by
electrostatic discharge.
Important: Always discharge static electricity before you touch any parts or install any
components inside the computer. To avoid generating static electricity, do not walk
around the room until you have finished installing the memory and closed the
computer.
5 Disconnect the power cord from the computer.
6 Insert the memory module into the memory slot. The module fits into the slot only one
way. Be sure to align the notch on the module with the small notch inside the slot.
With the ejectors in the open position, push down on the memory module until it locks
into place. The ejectors will automatically close.
LL2522.book Page 39 Wednesday, February 18, 2004 11:53 AM