Apple PowerBook (Duo, 2300 Series) - Manual (Page 125)

3 When Disk First Aid has finished checking your hard disk, choose Quit from the
File menu.
4 Open the Drive Setup program.
You use the Drive Setup program to update your hard disk.
5 In the list of drives, click your startup disk.
6 Pull down the Functions menu and choose Update Driver.
7 When the update process is finished, quit Drive Setup.
8 Shut down your computer.
9 Start up your computer from the first system software installer disk that you made with
the Floppy Disk Maker application.
The Installer’s Welcome screen appears. You may have to double-click the
System Software Installer icon to open the Installer program.
10 Click OK.
The Easy Install dialog box appears. (The dialog box that appears on your
screen may look slightly different than this one.)
11 Make sure that the hard disk named in the Destination Disk box is the one on which you
want to install system software.
If it isn’t, click Switch Disk until the correct disk name appears.
117 Diagnostic Techniques
Disk on which
system software
will be installed
For a clean installation,
DO NOT click the
Install button.
If you need to install on a
different disk, click this button.