Apple Macintosh System 7.5 - Manual (Page 30)

4 Type your name and the access code you want to use.
IMPORTANT Once your access code is set, you enter it each time your
computer starts up. You can leave the access code blank, if you do not want to
use a password.
Here are some tips for choosing an access code:
m It should not be your name.
m It must be at least six characters long. (The longer it is, the harder it will
be to guess.)
m Mix upper- and lowercase letters and use numbers, as in “4Me!Only.”
m Make it easy to remember and don’t write it down.
m Keep track of which letters are uppercase—the access code is case-
sensitive.
5 When a confirmation dialog box appears, type your access code again and click OK.
You can change your access code at any time in the PowerTalk Setup control
panel.
6 When you see the next confirmation box, click OK.
As soon as the confirmation box closes, open your Date and Time control
panel and make sure that the date, time, and time zone are all set correctly.
You now have access to PowerTalk services. The name of your Mailbox
changes to show that you are its owner.
24 Chapter 4