Class1 114356 - ITL 4LT with 1-wire and CAN COM 113739 114378 - Manual (Page 16)

FORM-ENG-0018 REV A 05-27-03
PAGE 15 of 22 S U I T A B L E F O R E X T E R N A L D I S T R I B U T I O N
OPERATION MANUAL
DATE 10/23/2007
PRODUCT GROUP ITL P/N 12V: 113739 ; 24V: 114378 REV 1.20
607 NW 27th Ave
Ocala, FL 34475
Ph: 352-629-5020 or 1-800-533-3569
Fax : 352-629-2902 or 1-800-520-3473 PRODUCT 4 LIGHT INTELLI-TANK DISPLAY WITH 1-wire and CAN BY AMS
DATASHEET P/N:114356 - UNCONTROLLED IN PRINTED FORMAT - P RINTED : 10/24/07
7.5. Communication wiring examples
The displays can be set up to use the 1-wire or CAN communication methods. A standard system could be
comprised of as few as 1 master display. Two master displays may be used in a system where two fluid levels must
be displayed (for example, 1 water tank and 1 foam tank).
7.5.1. 1-wire method, 1 master and 3 remotes
System configured with 1-wire communication method. Make certain that the ground for each display is tied to a
common point or the remote displays will not follow the master display.
7.5.2. 1-wire method, 2 masters and 2 remotes
System configured with 1-wire communication method. Make certain that the two master 1-wire data lines are not
connected and that the ground for each display is tied to a common point or the remote displays will not follow the
master displays.