Important application specific settings, Engine, Cam/crank – AEM Infinity Supported Applications - Dodge HEMI Engine User Manual

Page 3: Injector setup, Input functions, Output functions, Ignition sync, Infinity tuner wizard setup engine

Infinity Supported Application

IMPORTANT APPLICATION SPECIFIC SETTINGS

Infinity Tuner Wizard Setup

Engine

In the Wizard Engine tab confirm the following settings:

Number of Cylinders

= 8

Engine Cycle Type

= 4 Stroke

Ignition Type

= Sequential (Coil On Plug)

Firing Order

= 1-8-4-3-6-5-7-2

Cam/Crank

In the Wizard Cam/Crank tab confirm the following setting:

Dodge Hemi V8 (2005–2008)

Injector Setup

In the Wizard Injector Setup tab confirm the following setting:

Number of Injectors = 8

Input Functions

In the Wizard Input Functions tab confirm the following setting:

AC Input Switch Setup = AC_Req_dig

Output Functions

In the Wizard Output Functions tab confirm the following setting:

LowSide 8 Setup = MILOutput or EngineProtectOut

Ignition Sync

** NOTE: These settings are applicable to firmware release v95 and greater only.**

Add a text grid control to your layout and select the following channels. Make sure their values match
the settings below for initial timing sync.

TrigOffset [degBTDC]

= 24.00

CamSyncAdjustment

= 18.00

See QuickStart Guide section Setup: Ignition Sync for instructions on timing sync.