AEM Infinity Supported Applications - BMW 1995 E36 M3 - Manual (Page 5)

GETTING STARTED 5
© 2014 AEM Performance Electronics
IMPORTANT APPLICATION SPECIFIC SETTINGS
Infinity Tuner Wizard Setup
Engine
In the Wizard Engine tab confirm the following settings:
Engine Displacement (L) = 3.00
Number of Cylinders
= 6
Engine Cycle Type = 4 Stroke
Ignition Type = Sequential (Coil On Plug)
Firing Order = 1-5-3-6-2-4
Ignition Sync
Add a text grid control to your layout and select the following channels. Once the channels have been added, right
click and set them to Initial Value. Make sure their values match the settings below for initial timing sync.
TrigOffset [degBTDC] = 5.5
CamSyncAdjustment = 65
See QuickStart Guide section Setup: Ignition Sync for instructions on timing sync.
Cam/Crank
In the Wizard Cam/Crank tab confirm the following setting:
Universal 60-2 Mag Crank & 1 Hall Cam
Injector Setup
In the Wizard Injector Setup tab confirm the following setting:
Number of Injectors = 6
Low Side Assignment – Malfunction Indicator Lamp
In the Wizard LowSide Assignment tab confirm the following settings:
LS2 Setup:
Frequency = 30 Hz
LS2_Duty X-Axis = Engine Speed [RPM]
LS2_Duty Y-Axis = MILOutput