AEM 30-6060 Series 2 Plug & Play EMS - Manual (Page 2)

Page 2 of 12
Thank you for purchasing an AEM Engine Management System.
The AEM Engine Management System (EMS) is the result of extensive development on a
wide variety of cars. Each system is engineered for the particular application. The AEM
EMS differs from all others in several ways. The EMS is a stand alone system, which
completely replaces the factory ECU and features unique Plug and Play Technology,
which means that each system is configured especially for your make and model of car
without any jumper harnesses. There is no need to modify your factory wiring harness and
in most cases your car may be returned to stock in a matter of minutes.
For stock and slightly modified vehicles, the supplied startup calibrations are configured to
work with OEM sensors, providing a solid starting point for beginner tuning. For more
heavily modified cars, the EMS can be reconfigured to utilize aftermarket sensors and has
many spare inputs and outputs allowing the elimination of add-on rev-limiters, boost
controllers, nitrous controllers, fuel computers, etc. It also includes a configurable onboard
1MB data logger that can record any 16 EMS parameters at up to 250 samples per
second. Every EMS comes with all functions installed and activated; there is no need to
purchase options or upgrades to unlock the full potential of your unit.
The installation of the AEM EMS on the supported vehicles uses the stock sensors and
actuators. After installing the AEMTuner software, the startup calibration will be saved to
the following folder on your PC:
C:\Program Files\AEM\AEMTuner\Calibrations\Honda-Acura\
Multiple calibrations may be supplied for each EMS; additional details of the test vehicle
used to generate each calibration can be found in the Calibration Notes section for that
file.
Please visit the AEM Performance Electronics Forum at http://www.aempower.com and
register. We always post the most current strategy release, PC Software and startup
calibrations online. On the forum, you can find and share many helpful hints/tips to make
your EMS perform its best.
TUNING NOTES AND WARNING:
While the supplied startup calibration may be a good starting point and can save
considerable time and money, it will not replace the need to tune the EMS for your specific
application. AEM startup calibrations are not intended to be driven aggressively before
tuning. We strongly recommend that every EMS be tuned by someone who is already
familiar with the AEM software and has successfully tuned vehicles using an AEM EMS.
Most people make mistakes as part of the learning process; be warned that using your
vehicle as a learning platform can damage your engine, your vehicle, and your EMS.