AEM 30-6060 Series 2 Plug & Play EMS - Manual (Page 11)

Page 11 of 12
30-1060 (Series 1) vs 30-6060 (Series 2) OBD2A Honda EMS pin differences:
The EMS functions assigned to certain pins have been changed and no longer match the
30-1060 EMS. Unless otherwise noted, the following pins and functions will need to be
manually reconfigured after using AEMTuner to convert a V1.19 (30-1060, Series 1 EMS)
calibration for use with the 30-6060 Series 2 hardware.
Pin OBD2A Honda/Acura 30-1060 function 30-6060 function Notes
B11 --- Idle #2 Idle 4 Idle 2 available on pin B4
B13 --- FM --- FM output not available
B19 --- Coil #5 --- Coil 5 output not available
C9 Feedback at Signal Injector #7 --- Injector 7 available on pin B16
C23 --- Injector #10i Injector 12 Inj12 controlled independently of Inj10
C24 --- Injector #9i Injector 11 Inj11 controlled independently of Inj9
C28 --- --- CAN1L
C29 --- --- CAN1H
C30 ATTS Transmit PW #2i --- PW 2i not available