AEM 30-3520 Infinity Plug & Play Harnesses - Nissan/Infiniti 2003-2006 350Z/G35 - Manual (Page 30)

30
© 2014 AEM Performance Electronics
P/N 30-3520
Infinity
Pin
Hardware Reference
2003–2006 350Z/
G35
Specification
Dest. Pin
350Z/
G35
Hardware Specification Notes
C1-39 Harness_Analog_In_11
Shif t Switch
Input
12 bit A/D, 100K pullup to
5V
0–5V analog signal. Use +5V Out pins
as power supply and Sensor Ground
pins as the low ref erence. Do not
connect signals ref erenced to +12V as
this can permanently damage the
ECU. See the 1-axis lookup table
Shif tSwitch f or setup.
C1-40 Harness_Analog_In_12 Boost Mode
12 bit A/D, 100K pullup to
5V
0–5V analog signal. Use +5V Out pins
as power supply and Sensor Ground
pins as the low ref erence. Do not
connect signals ref erenced to +12V as
this can permanently damage the
ECU. See the BoostModeAnalogIn
channel f or input state. A multi-
position rotary switch such as AEM P/
N 30-2056 is recommended.
C1-41 +5V_Out_1 +5V Out TPS 47
Regulated, f used +5V
supply f or sensor power
Analog sensor power
C1-42 +5V_Out_1
+5V Out EVAP
Press
48
Regulated, f used +5V
supply f or sensor power
Analog sensor power
C1-43 Harness_HighsideSwitch_1
Spare Highside
(switched 12V)
0.7A max, High Side
Solid State Relay
See Setup Wizard page Spare
Highside f or conf iguration options.
See 2 axis lookup table Spare_HS f or
activ ation settings.
C1-44 Harness_HighsideSwitch_0 VTEC
0.7A max, High Side
Solid State Relay +12V High Side Driv e. See Setup
Wizard Honda VTEC page f or options.
C1-45 Harness_VR+_In_0
Crankshaf t
Position Sensor
VR+
Dif f erential Variable
Reluctance Zero Cross
Detection
See Setup Wizard page Cam/Crank
f or options.
C1-46 Harness_VR-_In_0
Crankshaf t
Position Sensor
VR-
See Setup Wizard page Cam/Crank
f or options.
C1-47 Harness_VR-_In_1
Camshaf t
Position Sensor
1 VR-
Dif f erential Variable
Reluctance Zero Cross
Detection
See Setup Wizard page Cam/Crank
f or options.
C1-48 Harness_VR+_In_1
Camshaf t
Position Sensor
1 VR+
See Setup Wizard page Cam/Crank
f or options.
C1-49 Harness_VR+_In_2
Non Driv en Lef t
Wheel Speed
Sensor +
Dif f erential Variable
Reluctance Zero Cross
Detection
See Non Driv en Wheel Speed
Calibration in the Setup Wizard Vehicle
Speed page.
C1-50 Harness_VR-_In_2
Non Driv en Lef t
Wheel Speed
Sensor -
C1-51 Harness_VR-_In_3
Driv en Lef t
Wheel Speed
Sensor -
Dif f erential Variable
Reluctance Zero Cross
Detection
See Driv en Wheel Speed Calibration in
the Setup Wizard Vehicle Speed page.
C1-52 Harness_VR+_In_3
Driv en Lef t
Wheel Speed
Sensor +
C1-53 Harness_HBridge0_0 HBridge0_0 4
5.0A max Throttle Control
Hbridge
+12V to Close